Recent content by d0nkey

Thats a scary situation, glad you got it rectified. I tend to be the pessimist who always checks my fluids (diff/trans/brakefluid/coolant/etc) during an oil change, because sometimes I don't trust my own work and have to double check it to make sure I did the previous jobs right!

Difference of +23 offset Roughly around 25mm in 1 inch. Subtract around 12mm of the offset for the gain of 1/2 inch on the 20x10. So with this rough (and quite possibly way incorrect), I'd imagine you have around 1/4" of less poke with the 20x10 +38 wheels.

Speaking of Porsche. I was just discussing with my buddies it was a little easier in filling and measuring in my 971 4s. But that being said, the F150 wasn't really difficult at all either, just was surprised how low the fluid was at operating temp. The only annoying part was sticking my hand...

Came around to drain & refill fluid and filter change. I started by draining, measuring total, then refilling the same. I brought the vehicle to 208F and checked the stick. barely a spec on the dip stick. I added 3/4 of a quart, let the vehicle run for 10 more min and was finally between 5...

Sorry to bring up an old thread, I was looking at these on the Stage3 website. I currently have the Quad LED reflectors and I quite enjoy the light output and visibility on the road. Are these equal to, if not, better than the quad reflectors in terms of brightness, output and usable...

It looks great!! Glad they came through for you.

very nice build!

I decided to go UPR newest drain spout instead of the Ronin. I like the triple gaskets and not needing an extra tool to open the spout. All in one so to speak. Just installed today, used Pennzoil PUP 5w30.

Thanks people, I ended up getting the WorkSport AL3. Not fully flip back, but it's only 45lbs and 3 year warranty. And Firefighter discount to boot!

added a .5 motofab spacer and icon delta joint UCAs

I think I already know the answer for this, but figured i'd see if anyone has experience with this item F150 ROLLER BED COVER My other options are the Worksport Tonneau Tri Fold.

Thanks, I was quoted between $700 and $1200 for the install, I used what my wife calls 'girl math' and did it myself and used that $1200 to buy Icon UCAs and am waiting for Black Friday to purchase a Bakflip bed cover :LOL: . What I observed is start with an easy one, I did the back seat...

Message this company, they do auto upholstery and are in the new leather take off business as well. They can do cup holder deletes by replacing it with matching leather, as they did mine: https://www.ebay.com/str/cbpartners

Thanks!!

Installing 1 seat a day, just 1 more to go. Lariat Leather, taken off at 20 miles. Ordered Icon Delta Joint UCA's. Will be installing those Friday along with MotoFab .5" spacers on the 6112's. (I didnt know I couldn't get on the last perch of the 6112's, and my local 4WD shop said this will...