Recent content by Bills

It is a 6” BDS lift as well. Yeah when loaded down and flexed I do get a small rub on plastic, not enough that I plan to bother with. I’ve only had it happen one time with a heavy load when off road. I think if I would have went with the coil overs up front it would likely not, but I went...

Here are a couple pics. Mileage took a bit of a hit, but my lead foot doesn’t help. I lost about 3mpg, still get some hybrid miles on electric maybe not quite as much but still gets some benefit from that.

Doesn’t sound like you are missing anything. All the info I had before I started was based on the tables and changing digits of that code, it wasn’t needed and changing the circumference was very easy.

It is actually pretty easy to do and you don’t need the codes or the tables. From the BCM module (not from the as-built menu), there is a selection for “tire circumference” that you can change and relearn. I changed mine to what the tire MFR said was the circumference and did a test ride...

Re-calibrated my speedo for the new tires with forscan.

like Sentinel said above it was pretty easy. So first go through and save all of the stock (Asbuilt) settings just so you have them for backup - there are videos online that show you how, and really that is the same procedure for the settings, so it is good practice before you really...

Just like posting these pics now…. Going to get front windows tinted to match, and going to order a cap soon.

there is a camera in the third brake light at the top of the truck. The cap will cover it entirely. Never had a camera there that I was aware of on previous trucks.

I will be trying to sort this out over the weekend as well. 325x60x20 I am about 5mph over at highway speed so gonna get this done real quick.

Here is my attempt at a before and after. BDS 6” installed with BFG KO2’s (325x60x20). There was a small amount of trimming on just the plastic trim up front.

Here is mine fresh back from lift install

Picked up mine from getting the BDS lift installed.

13Maso, BDS work and Play 21 f150 The truck you have asked about is the BDS show truck, link above has all the details on that build.

Got my new tires onto the wheels, ready for my lift to go on next. TCCustoms had BDS lifts in stock, so I’ve got everything but the driveshaft bearing spacer kit that should also be on the way. Hoping to have this stuff on in the next week or so. Couldn’t resist setting the new wheels next...

Truck looks great, I have the 157WB also and my 6” BDS arrives this week. It looks like you went 35”x12.5x20 on the Ridge grapplers. I am working out my tires yet, do you think 37” should have rubbed or is there a lot of clearance still with your setup?