Recent content by amkaras

I changed to the glare free in the SCCM and all is well now. Thanks again for the help. Does disabling the active air dam set any codes?

Perfect, thanks again.

Okay, thank you. I want it to do the hands on the steering wheel but steering itself mode...more than just the bumping from side to side off the lane markings. It should show a picture of the steering wheel with hands on it and I don't have that. It was always tied with bluecruise before, but...

Yes, I am saying that I still have the U2101 error even after changing everything back to factory. Could it be that I still have the other glare free changes made in all the other modules?

I found the picture from the thread I used as reference. I made it exactly like this and left the last 2 digits alone.

I think that was part of what snakebitten had used to disable the in cab camera. So I gave up bluecruise, but kept highway driving assist with hands on driving with no nanny warnings for looking away. I may be misremembering it and I can't find the thread offhand. But even after I made those...

It does have active steering and I am running the other changes for glare free. 724-01-01 is currently 8 as that is what it was in my default file. I pulled the SCCM file, and then went back to my factory settings sheet I had saved as advised. It fixed the buttons, but I still have the code...

U2101:00-2A. Yes, lane centering works. 8A58A2198E3A. I have attached 3 IPMS files. The oldest one is my default, the second oldest is config from the day I worked on the TCM error with you, and the third is the one I just pulled. I have a bunch of changes from the spreadsheet as a heads up.

Here they are. I uploaded the original file and the buttons work but no blue cruise or highway assist. I do have lane keeping.

Update: I went back to the default and now the buttons work, but I do not have blue cruise or highway assist availble to me now. I still have the SCCM DTC for configuration incompatible as well. I have rebooted the SCCM module a few times and cleared codes but it hasn't helped so far.

Please see below. I assume it is unrelated to this issue so I didn't share it originally. I can pull the current SCCM data and send over my default as well if needed. I only included that screen shot to show why I changed the cruise in easy mode. I fixed the ipma issue but caused this other...

I have the original as built saved from when I first started using Forscan so I had a default. I am not sure how to get the ab from Ford I guess. Both using easy mode to change it back to what is was and that default file didn't work. I don't know if it's conflicting with other changes or...

August 31st.

2021 Platinum with blue cruise equipment. I am having an issue where my left side steering wheel switches no longer function to turn on or control the cruise functions but the volume and stereo controls on the same side work. I was dealing with a IPMA software mismatch error causing the wrench...