XLT Power Folding Mirrors Retrofit - How To

[CarbonizedBrandon21]

I haven't been able to get a switch yet for mine. On backorder

Sponsored

 

[nvabill]

I haven't been able to get a switch yet for mine. On backorder

I've had great luck getting stuff quick from these guys.

https://www.fairwayfordparts.net/

 

[DuckDuckGreyDuck]

Thanks for the great write up. Was the window switch easy enough to swap out? Thanks.

 

[Rod507]

Any additional insights on the tow mirror version with BLIS, camera, puddle lights? Part #s and whether or not the same aftermarket harness will work?

 

[nvabill]

Thanks for the great write up. Was the window switch easy enough to swap out? Thanks.

Yes, it is, the existing housing and connector will fit the switch perfectly, at least in my truck that has the 302A High Package.

 

[nvabill]

Any additional insights on the tow mirror version with BLIS, camera, puddle lights? Part #s and whether or not the same aftermarket harness will work?

I'm not 100% sure but I believe the power fold will work on tow mirrors but they also have an additional switch to telescope the mirrors in and out. For that I believe you need an additional switch which is another location in the door panel, not sure how to get that one or wire it in.

 

[CarbonizedBrandon21]

I've had great luck getting stuff quick from these guys.

https://www.fairwayfordparts.net/

Unfortunately, nationwide backorder. I do have everything installed while I wait. If my mind is correct. I should be able to set up auto without the switch for now. Can you let me know what the values of all 3 need to be, or what you did I should say? Thanks for the great write up.

 

[nvabill]

Unfortunately, nationwide backorder. I do have everything installed while I wait. If my mind is correct. I should be able to set up auto without the switch for now. Can you let me know what the values of all 3 need to be, or what you did I should say? Thanks for the great write up.

I can't give you the exact value as I have been using the Forscan in plain english format. I can say you need to program the DDM, PDM and the APIM to the Ford power auto fold setting and not just the power fold as I had previously done.

 

[CarbonizedBrandon21]

Do you know what is Lincoln fold? I saw that on the forscan list on here.

 

[CarbonizedBrandon21]

Googles your friend. Lol. Found it

 

[nvabill]

Do you know what is Lincoln fold? I saw that on the forscan list on here.

Yes, I also looked it up but decided to just stick with Ford Auto Power Fold as that's what the Lariats come with.

 

[nvabill]

Unfortunately, nationwide backorder. I do have everything installed while I wait. If my mind is correct. I should be able to set up auto without the switch for now. Can you let me know what the values of all 3 need to be, or what you did I should say? Thanks for the great write up.

This is the way I have been using Forscan and I find it much easier than the spreadsheets.

 

[CarbonizedBrandon21]

This is the way I have been using Forscan and I find it much easier than the spreadsheets.

Thanks for that. I didn't know it got easier. So one of two things. You either NEED the switch or I didn't set something right. My mirrors didn't autofold and I set the ones you did.

 

[nvabill]

Thanks for that. I didn't know it got easier. So one of two things. You either NEED the switch or I didn't set something right. My mirrors didn't autofold and I set the ones you did.

I don’t think I would worry until after installing the switch.

 

[ponterpitt]

Usually the lariat mirrors have heat.. did you consider adding that as well?

Sponsored